The Universal Engine Mount Kit includes polyurethane vibration mounts and adapters to mount the front of most US domestic V8 engines to the 902s engine […]
Drag Pack ExtensionPerfect for choppers and drag bikes, the Drag Pack Extension is available in two lengths to accommodate wheelbases from 66 – 104 in (168 – […]
Pressurized Cooling ColumnsCT-700 Pressurized Cooling Column integrates seamlessly with boom assembly. Standard temperature range from 160° F – 230° F (71° C – 110° C). Rated for […]
Blow-By SensorThe Blow-By Sensor Measures the volumetric flow of crankcase blow-by. Two sizes available: 0.4 to 16 ACFM and .25 to 10 ACFM. Select either analog […]
AWD Load UnitThe third AWD Load Unit equips the 97000 to test most AWD transmissions. The floor mounted unit is equipped with an eddy current absorber and […]
Auto ShiftThe linear shift actuator controls the manual detent position of the transmission. Since it uses a cable, the Auto shift can connect to most every […]
ATV RollThe ATV Roll attaches to either side of the CycleDyn base (or to the eddy current for extra wide applications) to accommodate ATVs, legends cars, […]
ATV DeckThe ATV Deck mounts to the front of the ATV Roll to accommodate ATVs, legends cars, dwarf cars and go karts. It’s available in standard […]
Analog Panel8 channel analog panel to integrate exhaust analyzers, lambda sensors and other devices with analog outputs. Select 0-1V, 0-5V, 0-10V, 0-20V or 0-30V
Air Ram AssemblyThe air ram assembly holds the converter halves together while its cut open. It’s available with Morris taper or straight shaft mounts.
Additional Docking Cart – SF-902SAdditional docking cart to save time between engine tests. Pre-stage one engine while another is being tested.
Adapter PlatesSuperFlow offers a choice of 15 precision alignment adapter plate packages for your transmission dynamometer.
AC Motoring CubeThe AC Motoring Cube brings emissions level test data the CycleDyn. It allows you to perform R&D economically prior to final certification. It also simulates […]
Ramp Kit – CycleDynAluminum ramp kits are available for above ground installations. The 36 in (91 cm) wide ramp is available in 72 in (183 cm) or 94 […]
6 Jaw ChuckSuperFlow offers an upgrade your Lathe Chuck from 3 to 6 independent jaws.
Sensor BoxThe SuperFlow Sensor Box features state of the art electronics to measure, condition and digitize high-resolution data and then broadcast it over an Ethernet network […]
Control ConsoleSuperFlow’s control console features a new combined touch encoder and a redesigned manual throttle with easier actuation. Up to ten PID controllers with default load […]
AFR/LAMDA Sensor KitAFR/LAMDA sensor kits available. Kits available in 2-16 channels. Bosch LSU 4.2, 4.9 and OEM grade NTK type sensors available.
Diesel Exhaust Opacity MeterThe Diesel Exhaust Opacity Meter measures the opacity of visible smoke coming from the exhaust. It’s rugged and portable design provides years of easy use. […]
AC-SeriesThe AC-Series (Alternating Current) engine dyno is designed for additional functionality not provided by other dynamometer testing technologies. The AC-Series is capable of applying power […]
Heavy Duty Transmission Shift ConsolesHeavy-duty transmission shift consoles are designed for service centers who need the ability to control and test heavy duty transmissions, flash transmission control modules (TCMs), […]
Axiline VBT 8000The Axiline VBT 8000 by Power Test is the valve body tester standard for the advanced valve bodies of today. With an innovative design and […]
SF-750The SF-750 is the new standard in digital flow testing, with more capacity than its predecessor, the SF-600, and increased accuracy with digital measurements. It […]
Eddy CurrentSuperFlow offers a broad selection of technologically advanced eddy current absorbers which are ideal for precise engine testing. Low minimum load capabilities allow testing of […]
SF-3000BWThe SF-3000BW, also known as the Black Widow engine dyno from SuperFlow, is unmatched in its combination of low speed torque capacity and high-speed power […]
SF-250A CycleDynThe SuperFlow CycleDyn is a chassis dynamometer designed to test motorcycles, karts, UTVs (quads), and similar vehicles within a safe, controlled environment. Testing on a […]
SF-832The AutoDyn™ 30 chassis dyno is quite possibly the most versatile chassis dynamometer on the market today. It comes standard with SuperFlow® Road Simulation Technology […]
Hicklin EdectThe Hicklin EDECT Transmission Test Stand is engineered for heavy-duty transmissions including inline, v-drive, and angle-drive configurations. It is applicable for a wide range of […]
Axiline 97000The Axiline 97000 is fully digital for highly accurate, repeatable, and easy automotive transmission tests. The 97000 is fully adaptable to domestic, foreign, front-wheel drive, […]
SF-1020The SF-1020 measures and records air flow at OEM engineering accuracy, faster than any other flowbench on the market. It can test up to 240 […]
Single Gun Torque Converter WelderThe most popular converter welder in the TCRS® lineup is the Single Gun Welder featuring a Miller® Invision™ 352 MPa power supply and a 74 […]
SF-902SFor more than four decades, the SuperFlow 900 series of dynamometers (SF-900, SF-901, SF-902) has served as the benchmark in the performance industry for conducting […]
SF-880E AWDThe Tuners Choice The SF-880E AWD chassis dyno was built for serious automotive performance tuners who want unmatched quality, capacity and data acquisition. Electric Wheelbase […]
SF-832 AWDUnmatched Quality and Value The SF-832 AWD chassis dyno is an entry level all wheel drive dyno with features only found on premium models. Electric […]
SF-849The AutoDyn™ 849 two-wheel-drive chassis dyno is unrivaled in the marketplace. Its dual eddy current absorbers provide 1,600 horsepower of loaded absorption capability and its […]
